Open Placer Mini

//Open Placer Mini

Open Placer Mini

$1,499.00

Out of stock

The Ingenious OpenPlacer

  • An Affordable Pick and Place Machine
  • PCB assembly was not this easy before
  • Robust Structure
  • Modular
  • Works Perfect with the OpenPnP Software
  • 800 chips per hour

Technical Properties of Open Placer Mini:

  • Working Area: 295 mm x 195 mm
  • Footprint: 340 mm x 440 mm
  • Maximum Board Dimension: 100 mm x 150 mm
  • Maximum Component Height: 6 mm
  • 1 Main Feeder 1 Optional Feeder Capability
  • USB 2.0 Connection

 

Out of stock

Description

The Open Placer has several properties that steps it forward against its alternatives, which are;

  • Runs with open sourced OpenPNP software
  • Modular design with ease of replacing electronic components and feeders
  • Robust design with high mechanical accuracy; 0.05 mm (2 mils)
  • High working area / footprint ratio
  • 800 chips per hour (Ideal for prototyping)
  • Integrated vacuum pump (No external pump need)
  • Bottom and top camera support
  • Nozzle Capacity: 4
  • Selectable Trash Area and Park Location
  • 100 -240 V AC operating voltage
  • 30 – 50 W power consumption

The Open Placer Mini will be sent as an assembled kit. You just need to plug the cables and push a tubing.

It contains,

  • The robust XY table with all required components to move smoothly
  • The pick and place head with the nozzle, Z and A axis motors, head cam and required sub components
  • The controller card
  • The vacuum pump
  • Switch Mode Power Supply (SMPS)
  • Power Cable
  • 3 USBA – USBB cables
  • 2 nozzles (1.0 mm inner diameter(ID) / 1.2 mm outer diameter(OD) and 1.0 mm ID / 2.8 mm OD)
  • 1 Main Feeder (10 x 8 mm pitch)
  • Bottom Camera

There is space for a second main feeder but it is not included in the kit. Optional feeders are also not included in the kit.